Bingkai Bahan Oven Penyembuhan Udara Panas Vertikal

Product number: KL-650

The transmission design is more scientific, and the risk of jamming is minimized: the internal transmission has no connection point, and the transportation is smooth.
Intelligent shielding fault layer to improve operation efficiency: during equipment operation, when the support bar of a certain layer or several layers in the vertical furnace is in fault, the shielding of the plate passing layer can be selected in the operating system, which will not affect the use of the equipment. However, the general vertical furnace in the market does not have this function.
Adjustable operation range, more energy saving and consumption reduction: the vertical furnace with material frame can realize small cycle action, and the product does not need to pass through the top layer.
Innovative needle roller active transportation and rejection of jamming and plate damage: when using(vehicles)will stop when they are stuck, while the vertical furnace where the traditional chain drives the products (fixtures)to move will act forcefully when they are stuck, resulting in the products when they are stuck, resulting in the products.

Model	KL-650
Rentang produksi yang berlaku	Curing after dispensing or pasting of consumer electronincs
Dimensi (mm)	2150(L)2050(W)2150(H)
berat (Kg)	<2000KG
Waktu pemanasan	10minute
Rentang pengaturan suhu	Room temperature – 200°C
Metode kontrol	±1.0°C
Number of temperature zones	4
Heating mode	Large circulation of hot air, two sides blowing and top return air
Metode kontrol	PID closed-loop control +SSR drive
PCB boad temperature distribution deviation	±3.0°C
Min beat	15S
PCB maximum size(mm)	650(L)×460(W)
Rentang penyesuaian lebar rel	80~460mm
Track width adjustment	Automatic width adjustment, and fixed track near the operating surface
Product flow	From left to right
Layer spacing	20mm
Transport height（mm）	950±30mm
Number of layers	60 layers
Installed power	67KW