01.08.2026

In modern SMT manufacturing, pick and place programming is where production lines succeed or fail before a single component hits the board. This guide walks through everything from centroid file formats and machine programming workflows to Hermes and CFX line integration protocols, with practical strategies for reducing defects and maximizing OEE. Whether you’re running a pilot line or high-volume production, the path to below 50 DPMO starts with getting your placement data right.

Small parameter changes in wave soldering can destroy your production line. A 2mm wave height bump cost one manufacturer $12,000 in scrap. This guide covers the critical settings—flux, preheat, conveyor speed, solder temperature—and explains how they interact, how to calculate them, and how to optimize them for reliable PCB assembly.