Basic Definition
- For automatic board loading and unloading operations.
- For the automatic collection of AOI, NG/OK boards were inspected in different magazines.
- Used as a buffer between SMT machines.
Various functions available
- Standard model features.
- Independent board collection function.
- Independent board feeding function.
- Cache first-in-first-out function.
- Cache first-in, last-out function.
- NG/OK fonksiyonu
Common Faults and Treatment
1. The whole machine is not powered on：
Alarm analysis
- The plug is not energized.
- The main switch of the power supply in the electrical box is not turned on.
- The power fuse is burned or has poor contact.
- Inadequate switching power supply (AC220V—DC24V).
- The power terminal is loose.
Processing method
- Check the socket and plug cable.
- Check the power switch and AC input.
- Replace the fuse.
- Replace the switching power supply.
- Check the terminal and tighten it.
2. The touch screen does not have power
Alarm analysis
- The power switch of the operating platform is not turned on.
- The working voltage of the touch screen(DC24V) is abnormal.
- The power supply self-locking relay is broken.
- The touch screen is broken.
Processing method
- Turn on the power switch or check the switch.
- Check DC24V (provided by PLC).
- Replace the relay.
- Replace the touch screen.
3. The touch screen is not working(There is a screen display but the operation is invalid)
Alarm analysis
- The touch screen and PLC connection are bad (or poor contact).
- PLC is not working.
- Emergency stop switch lock.
- The touch screen is broken.
Processing method
- Check the communication line.
- Check PLC.
- Release the emergency stop switch.
- Shut down and restart.
- Replace the touch screen.
4. An alarm occurs
Alarm analysis: There is fault protection.
Processing method: Follow the on-screen prompts to check.
5. The track does not run
Alarm analysis
- Control line.
- The drive motor is not working.
- The motor or drive is damaged.
Processing method
- Check whether the control line is damaged.
- Check the working voltage of the driver and check whether the motor is open.
- Replace the motor and drive.
Ekipman Onarım ve Bakımı
Maintenance parts
- Triger kayışı: Kayışın eskiyip eskimediğini kontrol edin.
- Her bir fotoelektrik sensörün incelenmesi: Toz temizleme ve hassasiyet kontrolü.
- Her özelliği manuel olarak test edin: Dokunmatik ekran manuel ekran.
- Şanzıman bileşenleri: Herhangi bir anormal gürültü olup olmadığını kontrol edin, vida sıkın.
- Inspection in the electric control box: Dust cleaning.
Şirkete Genel Bakış
Shenzhen Chuxin Elektronik Equipment Co, Ltd 1997 yılında kuruldu, tescilli ticari marka: S&M, bağımlı bir sanayi parkı içinde ulusal bir yüksek teknoloji kuruluşudur ve elektronik bileşen yüzey yapıştırma kaynak ekipmanı ve iletim ekipmanı endüstrisinin lideri olmaya kararlıdır. Ürün hattı, elektronik bileşenlerin yüzey yapıştırıcı kaynağı yeniden akış kaynağı, yatay ve dikey kürleme fırınları, delikli kaynak dalgası lehimleme, seçici dalga lehimleme, SMT iletim ekipmanı ve özelleştirilmiş otomasyon ekipmanlarının araştırma ve geliştirme ve üretimini özetlemektedir.